W / B Urethane is a non-yellowing clear sealer with 56% solids, is an aliphatic urethane coating with excellent adhesion. It is recommended for high traffic floors and performance, as a final sealing epoxy flooring system or as separate sealing surfaces polished concrete, acid stain floors with concrete or any surface that needs coverage and high resistance to wear and friction.
To apply the product is recommended to prepare the surface, leaving it clean, dust free and completely dry. The ideal is to work at room temperature between 13 º C to 29 º C and relative humidity around 75%. Floor which to work must be fully cured according to the procedure and time specified by the manufacturer of the slab or the technical specifications indicated. Do not apply the W / B Urethane on sealers or acrylic paints.
The preparation of W / B Urethane is mixing the component A (resin) with component B (Hardener) by mixing for a period of 2 to 3 minutes. The ratio is a can of hardener per gallon of resin. Under no circumstances must vary the proportion or re-store the product once mixed. Do not allow air into the mixture, it will cause the bubbles to the surface where it will be applied the product. Once mixed the time to apply the product is 1 to 2 hours at an average temperature of 24 º C and 50% relative humidity.
Apply with airless sprayer, roller or brush. Do not allow product to accumulate in puddles and not forming layers of more than 2 millimeters thick.
Additional consultations of this product at 01 3464070.
0 comments:
Post a Comment